#Antec h2o 920 software download full
#Antec h2o 920 software download series

When the company sent us its top-of-the-line KГњHLER H 2O 920, we had trouble telling it apart from Corsair's Hydro H70 - the radiator, the pump and even the packaging all look remarkably familiar. Quite a few we'd imagine, and you wouldn't be alone.

#Antec h2o 920 software download series

How quiet is Silent, how extreme is Extreme.Hands up, how many of you thought that Antec's new range of Asetek-produced liquid coolers would be little more than the Corsair Hydro Series with a different badge? Legit Reviews Intel Core i7-930 Test System View this thread in our forums! Article Contents It was a 120mm 7 blade fan that ran a 2000 RPM and pushed 81.3 CFM. This is different from the fan that was included with the Kuhler H2O 620.

#Antec h2o 920 software download full

The fans that come with the Kuhler H2O 690 have an operating range of 700 to 2400 RPM, and push 110 CFM at full speed. I set the 920 and 620 radiators side by side so you can get a goo feel for how much thicker the 920s radiator is compared to its little sibling the 620. When paired with the included fans the mounting thickness is 4 or 100mm. Like with the Corsair H70 the Kuhler H2O 920 has a thick single 120mm radiator. With the stock paste out of the way we can see the cold plate for the Kuhler H2O 920 has a nice finish to it. The unit comes with thermal paste pre-applied to the base of the cold plate. Corrugated tubing is very stiff in comparison, so the flexibility will make it much easier to install. The soft rubber tubing is very flexible, and can have a rather tight bend radius. The Antec Kuhler H2O 920 also has soft flexible rubber tubing, rather than stiff corrugated tubing.

This is adjusted in the Chill Control V software. Now unlike the Kuhler H20 620 we recently looked at, on the Kuhler H2O 920 the Antec logo is back lit with a color adjustable RGB LED. To aid in installing the kit the tubing is connected to the pump with 90 degree swivel fitting. The Kuhler H2O 920 has a nice low profile pump and cold plate housing. This is how the Chill Control V software will communicate with the cooler. The USB cable connects to an open USB header on the motherboard as well. This means that the Kuhler H2O 920 will only take 1 motherboard fan header. One power lead is for connecting to the motherboard. There are two power leads and a USB cable coming from the pump housing. Mounting to the rear 120mm fan port, the 13 tube length should be just right.

Some small cases there could be an issue with the hoses being too long, same for really huge cases and the hoses being too short to mount the radiator in the top of the case. So mounting the radiator and still reaching the CPU socket should not be an issue with most cases. The hoses are 13 inches, and the pump power wire and USB cable is 12вЂі long.